lifehackchallenge 
Best results for 25/32 drill bit
Hiltex 10005 HSS Silver and Deming Industrial Drill Bit Set (8 Pieces), 1/2"
$29.99
$40.79
Amazon.com
Last update was on: November 25, 2024 9:39 am
- High speed stainless steel is designed to ensure sharp and fast execution in any material for clean results
- Heat treated carbon steel with a black enamel coating is durable and can withstand heavy duty operation for a long tool life
- Bit is precision ground with geometry of 135-degree split point for quick penetration and an accurate start
- Tri-flat on the shanks of drills are constructed for tighter chucking maximizing security for precise holes
IRWIN Tools 63112ZR 3/16-Inch Cobalt 135-Degree Jobber Length Drill Bit, Pack of 12
$15.76
$20.80
Amazon.com
Last update was on: November 25, 2024 9:39 am
- M-35 Cobalt Construction for Durability in abrasive materials
- Jobber drill bits feature 135-Degree Split Point Tips for reduced bit walking
- Straight shank works in both keyed and key-less drill chucks
- Heavy duty spiral flute design produces faster chip ejection
- Shorter cutting lips reduce torque for drilling in high tensile strength materials
Bosch BL2161 17/32 In. x 6 In. Fractional Reduced Shank Black Oxide Drill Bit
$11.87
$15.31
Amazon.com
Last update was on: November 25, 2024 9:39 am
- Speed helix design for three times faster drilling than standard bits
- Last 50 percent longer than high-speed steel
- Easier drilling, reduced heat and extended drill bit life
- Available in jobber length, stubby length, extended length (aircraft), 1/2 In. reduced shank (Silver and Deming)
- For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials
Bosch CO2145 9/32 In. x 4-1/4 In. Cobalt Drill Bit
$9.99
$12.29
Amazon.com
Last update was on: November 25, 2024 9:39 am
- Withstands high-temperature applications for extended periods of time (up to 1,100 degreeF)
- Rigid, thick web design adds stability to bit in tough applications
- Surface hardened to penetrate tough abrasive materials
- Available in jobber length, full shank
- Best used for drilling into light-gauge metal, high-carbon steel, aluminum and ally steel, cast iron, stainless steel and titanium
Bosch CO2153 13/32 In. x 5-1/4 In. Cobalt Drill Bit
$8.93
$12.14
Amazon.com
Last update was on: November 25, 2024 9:39 am
- Withstands high-temperature applications for extended periods of time (up to 1,100 degreeF)
- Rigid, thick web design adds stability to bit in tough applications
- Surface hardened to penetrate tough abrasive materials
- Available in jobber length, full shank
- Best used for drilling into light-gauge metal, high-carbon steel, aluminum and ally steel, cast iron, stainless steel and titanium
Bosch CO2152 25/64 In. x 5-1/8 In. Cobalt Drill Bit
$14.48
$15.93
Amazon.com
Last update was on: November 25, 2024 9:39 am
- Withstands high-temperature applications for extended periods of time (up to 1,100 degreeF)
- Rigid, thick web design adds stability to bit in tough applications
- Surface hardened to penetrate tough abrasive materials
- Available in jobber length, full shank
- Best used for drilling into light-gauge metal, high-carbon steel, aluminum and ally steel, cast iron, stainless steel and titanium
DEWALT DW1122 11/32-Inch Black Oxide Split Point Twist Drill Bit
$4.98
$5.73
Amazon.com
Last update was on: November 25, 2024 9:39 am
- General purpose bit for drilling through metal, wood, fiberglass, stainless steel
- This product is manufactured in China
- This product meets customer requirement
- 135 degree split point drills on contact and prevents from walking
- Parabolic flute design improves chip ejection in metal and wood drilling applications
- Black oxide coated for greater resistance to wear
Bosch BL2177 25/32 In. x 6 In. Fractional Reduced Shank Black Oxide Drill Bit
$16.09
$22.69
Amazon.com
Last update was on: November 25, 2024 9:39 am
- Speed helix design for three times faster drilling than standard bits
- Last 50 percent longer than high-speed steel
- Easier drilling, reduced heat and extended drill bit life
- Available in jobber length, stubby length, extended length (aircraft), 1/2 In. reduced shank (Silver and Deming)
- For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials
MaxTool 25/32" Silver and Deming Drill Bit (Prentice); High Speed Steel M2; 118 DEG POINT; 6" OAL 1/2" Reduced Shank Black Oxide; SD02B00R050
Amazon.com
Last update was on: November 25, 2024 9:39 am
- Quality HSS M2 ensures sharp and fast execution in any material for clean results
- Premium Heat treated black oxide is durable and withstand heavy duty operation for a long tool life
- Black Oxide Surface Treatment holds up lubricant better for smoother drilling
- 6" OAL & 1/2" Str. shank fits 1/2" drill chuck
- Milled & polished flutes ensure chips move smoothly
- Precision ground with geometry of 118 degree chisel for quick penetration and an accurate start
Champion Cutting Tool BlackGold XG12-25/32 Silver & Deming1/2" Shank Drill: MADE IN USA
$30.76
$40.60
Amazon.com
Last update was on: November 25, 2024 9:39 am
- Heavy Duty BlackGold Silver & Deming drills have superior strength and durability than standard S&D Drills
- BlackGold surface treatment holds lubricant for smoother, longer drilling. Drill faster and penetrate more accurately due to 118* split point.
- 1/2" Flatted Reduced Shank for use in portable drills or drill presses where max chuck capacity is 1/2"
- Ideal for drilling steel, steel plate, stainless steel, cast iron, titanium, nimonic alloys, manganese, and other tough materials
Drill America 25/32" Reduced Shank High Speed Steel Black & Gold KFD Drill Bit with 1/2" Shank, KFD Series
$15.48
$17.34
Amazon.com
Last update was on: November 25, 2024 9:39 am
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Gold and black surface treated for use in stainless steel and other hard metal drilling
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
25/32" High Speed Steel 1/2" Shank Drill Bit (S + D type drill)
Champion Cutting Tool Heavy Duty XL12-25/32 Silver & Deming1/2" Shank Drill: MADE IN USA
$48.65
$72.49
Amazon.com
Last update was on: November 25, 2024 9:39 am
- Brute Platinum Heavy Duty S&D Drills drill large diameter holes faster and longer than other drills on the market
- Penetrate quickly and accurately due to premium high speed steel and 118* split point
- 1/2" Flatted Reduced Shank for use in portable drills or drill presses where max chuck capacity is 1/2"
- Ideal for drilling steel, steel plate, stainless steel, cast iron, titanium, nimonic alloys, manganese, and other tough materials
MLCS 9263H 25/32-Inch Diameter Steel Forstner Bit with Hex Shank
Drillco 1000EF Series High-Speed Steel Reduced-Shank Drill Bit, Black/Gold Oxide Finish, Round Shank with Flats, Spiral Flute, 135 Degree Split Point, 25/32" Size
Amazon.com
Last update was on: November 25, 2024 9:39 am
- Reduced shank drill bit has a shank that is smaller in diameter than its shaft and a shorter length than other reduced-shank bits in larger sizes, permitting portable drilling with a 1/2" drill chuck
- Designed for drilling tough, high-tensile strength materials
- High-speed steel (HSS) provides hardness for wear resistance
- Black and gold oxide finish resists corrosion and increases the hardness of the drill bit for additional wear resistance
uxcell 2pcs Carbide Hinge Boring Forstner Drill Bit, 20mm Diameter, 7mm Shank
$9.39
$13.24
Amazon.com
Last update was on: November 25, 2024 9:39 am
- 20mm Carbide Tip Forstner Drill Bit
- Drill flat bottomed holes without splintering
- Drill straight, angled and overlapping holes
- Two spurs and center spur to give repeated, clean and accurate hole cutting
- Drill precise flat bottom holes with no chipping in any thickness of soft wood
uxcell 2pcs Hinge Boring Forstner Drill Bit, 20mm Diameter, 7mm Shank
$7.44
$8.41
Amazon.com
Last update was on: November 25, 2024 9:39 am
- 20mm Carbide Tip Forstner Drill Bit
- Drill flat bottomed holes without splintering
- Drill straight, angled and overlapping holes
- Two spurs and center spur to give repeated, clean and accurate hole cutting
- Drill precise flat bottom holes with no chipping in any thickness of soft wood
Bosch BL2164 37/64-Inch Black Oxide 1/2-Inch silver and deming
$13.16
$18.69
Amazon.com
Last update was on: November 25, 2024 9:39 am
- Speed helix design for three times faster drilling than standard bits
- Last 50 percent longer than high-speed steel
- Easier drilling, reduced heat and extended drill bit life
- Available in jobber length, stubby length, extended length (aircraft), 1/2 In. reduced shank (Silver and Deming)
- For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials
Bosch CO2154 27/64 In. x 5-3/8 In. Cobalt Drill Bit
$9.40
$10.90
Amazon.com
Last update was on: November 25, 2024 9:39 am
- Withstands high-temperature applications for extended periods of time (up to 1,100 degreeF)
- Rigid, thick web design adds stability to bit in tough applications
- Surface hardened to penetrate tough abrasive materials
- Available in jobber length, full shank
- Best used for drilling into light-gauge metal, high-carbon steel, aluminum and ally steel, cast iron, stainless steel and titanium
