lifehackchallenge 
Best results for dremel tungsten carbide bits
10pcs 1/8" Double Cut Tungsten Carbide Rotary Files Diamond Burrs Set Fits Dremel Rotary Tool for Grinder Drill, DIY Wood-working Carving, Metal Polishing, Engraving, Drilling
$12.23
$13.58
Amazon.com
Last update was on: January 20, 2025 9:05 am
- LONG WORKING LIFE: Lasts long working life, packed with nice plastic case for safety storage and protection. High efficiency, high-quality finish, long service life, good economic returns.
- CARBIDE DIE GRINDER BITS Material: Tungsten Carbide Use: Rotary Burr. Total length 45-50mm, cutting diameter 1/4 Inch(6mm), shank length 35mm, shank diameter 1/8 inch(3mm).
- HIGH PRODUCTIVITY: Processing efficiency than the manual file to improve of times, than with a small handle wheel to improve nearly ten times.
Carbide Burr Set JESTUOUS 1/8 Shank Diameter Double Cut Tungsten Carbide Burs Rotary File Carving Grinding Bit for Die Grinder Rotary Drill Tool 20pcs
$17.99
$23.21
Amazon.com
Last update was on: January 20, 2025 9:05 am
- Used with handheld electric or pneumatic tool drive,for Die Grinder, Dremmel Tool or Rotary Drill which can go along with 1/8" shank carbide burs.
- With tungsten carbide material ,sharp and sturdy,processing all kinds of metal and non-metal.
- For cast iron, cast steel, carbon steel, alloy steel, stainless steel,plastics,metal and other materials.
- Assorted shapes include: ball, cone, rounded cylinder, flat top cylinder.
Dremel 9901 Tungsten Carbide Cutter
YUFUTOL 20pcs Solid Carbide Burr Set 0.118‘’（3mm）shank Tungsten Carbide Rotary Files Burrs with 3mm Cutting Head diameter Fits Most Rotary Drill Die Grinder for Woodworking,Engraving,Drilling,Carving
Amazon.com
Last update was on: January 20, 2025 9:05 am
- 【Quantity】20 pcs Solid Carbide Rotary Burr Set, 0.118 inch shank(3mm) ,approximate 1/8 inch, fits dremel and most small rotary tools
- 【Durable】Whole Piece made of heat-treated solid tungsten carbide that lasts long working life, sharp and sturdy
- 【Target】Suitable for all skill level | this is a essential kit for woodworkers & enthusiasts who cleans up welds or works with metal frequently, easy to grasp and use, safe and reliable
Dremel 9933 Structured Tooth Tungsten Carbide Cutter
$8.68
$10.33
Amazon.com
Last update was on: January 20, 2025 9:05 am
- The product is 5/16" Tung Carb Cutter
- Teeth made of tungsten carbide, the hardest material next to diamonds
- For fast material removal on fiberglass, wood, plastic, epoxy
- Also great on rubber, laminates, particleboard, soft metals, and ceramic wall tile
KOTVTM 20Pcs Tungsten Steel Solid Carbide Rotary Burr Tool 1/8" Shank Single/Double Cut Head Fits Rotary Tool for Woodworking Drilling Carving Engraving
$17.99
$19.79
Amazon.com
Last update was on: January 20, 2025 9:05 am
- Material: Tungsten steel Solid Carbide
- 20 pieces Carbide Rotary Burr Set,Contain 10pc single cut heads and 10pc double cut heads
- Product length:38.5mm, shank diameter,3mm(about 1/8''),grinding head cutting diameter ,3mm(about 1/8'')
- Can be used with most hand power tools including handheld electric or pneumatic tool drive (can also be used in machine tool)
- works with mostly small rotary tools for DIY engraving fans
Wokesi 10Pcs,1/4"Cutting Diameter,1/4"(6mm)Shank Diameter,Solid Tungsten Carbide File Cutter Taper Points Burrs Grinding Head Fit Dremel Bits Endmills for Rotary Tools (1/4”(6mm))
$25.00
$29.00
Amazon.com
Last update was on: January 20, 2025 9:05 am
- Cutting Diameter=1/4"(6mm),Shank Diameter=6mm(approx:1/4''),OAL=64mm
- Material:Solid tungsten carbide,long tool life.good concentricity and consistency at surface processing
- Suitable for process Copper,Aluminum,Alloy,Iron,Marble,Jade,Steel,Glass,Wood and Plaster etc,High Performance.
- Used in the parts bevel edge,inverted round and trench processing,the clean-up casting.
- Package:1 Pack of 10 Pieces
Double Cut Titanium Carbide Rotary Burr Set – Rocaris 10 Pieces 1/8"(3mm) Shank and 1/4"(6 mm) Head SizeTungsten Steel, for Woodworking, Drilling, Metal Craving, Engraving, Polishing
$17.99
$19.97
Amazon.com
Last update was on: January 20, 2025 9:05 am
- 【Carbide Die Grinder Bits】Tungsten Carbide Use: Rotary Burr. Total length 45-50mm, cutting diameter 1/4 Inch(6mm), shank length 35mm, shank diameter 1/8 inch(3mm).carbide rotary burr set with 1 4-inch shank.
- 【Double Cut Design】The groove lines of the head are crossed, more suitable for an object whose density is relatively low, such as wooden, plastic and aluminum.
- 【Long Service Life】The service life of tungsten steel rotary burr is 10 times longer than high-speed steel and 200 times longer than grinding wheel.
YXGOOD 10 Pieces Tungsten Carbide Double Cut Rotary Burr Set with 3 mm (1/8 Inch) Shank and 6 mm (1/4 Inch) Head Size
Dremel 9904 Tungsten Carbide Cutter
$7.64
$9.78
Amazon.com
Last update was on: January 20, 2025 9:05 am
- Use on Hardened steel, fired ceramics and other hard materials
- 1/8" Maximum cutting head
- 1/8" Shank
- Do not use for drilling or enlarging holes less than twice the diameter of the cutter to avoid carbide surface catching side of hole and breaking
- For best results insert bit in tool and back out slightly before tightening down to provide plenty of shank for the collect or chuck to hold the bit
- Secure objects to a stable surface while working
Dremel 9910 Tungsten Carbide Cutter
$8.99
$9.89
Amazon.com
Last update was on: January 20, 2025 9:05 am
- The product is 1/8 Inch Diameter, Tungsten Carbide Cutter
- Do not use for drilling or enlarging holes less than twice the diameter of the cutter to avoid carbide surface catching side of hole and breaking
- Secure objects to a stable surface while working
- Use the sides of the cutter (rather than the tip) for effective cutting the tip cuts poorly and can break under pressure
- Use higher speeds for hard woods slower speeds for metals and very slow speeds for plastics
Yakamoz 10 Pieces Double Cut Tungsten Steel Solid Carbide Rotary Burrs Set with 1/8"(3mm) Shank Twist Drill Bit For Dremel Rotary Tools
$11.99
$16.43
Amazon.com
Last update was on: January 20, 2025 9:05 am
- Tungsten Carbide Double Cut Rotary Burr SET 1/8" shank Fit Dremel
- Shank diameter: 3mm, Shank Length: 35mm, Cutting edge diameter: 6 mm
- Material: Tungsten | Carbide Use: Rotary Burr, High micro hardness,high abrasion resistance,good toughness.
- High performance on processing Copper, Aluminum, Alloy, Iron, Marble, Jade, Steel, Glass, Wood and Plaster etc.
- Highly recommended for polishing metals and plastics, jewelers, lapidary use, hobbies, crafts, craft modeling, home repair and so much more.
Dremel 9906 Tungsten Carbide Cutter
$5.00
$5.75
Amazon.com
Last update was on: January 20, 2025 9:05 am
- The product is 1/8" Diameter Tungsten Carbide Cutter
- Use for shaping, smoothing and material removal
- For use on hardened steel, stainless steel, cast iron, ceramics, hardwoods and other hard materials
- Do not run in excess of 30,000 RPM
