lifehackchallenge 
Best results for power shears drill attachment
Malco TS1 Turbo Shear 20 Gauge Capacity Sheet Metal Cutting Attachment
Genesis GES40 4.0 Amp Corded Swivel Head Variable Speed Electric Power Metal Shear
$43.90
$54.44
Amazon.com
Last update was on: November 25, 2024 4:50 pm
- Quickly cuts metal roofing, flashing, and other sheet metal up to 14 gauge | Compare the Genesis metal shear to other drill attachment Shears that can only cut 20 gauge Sheet metal!
- Powerful 4.0 amp motor
- 360° swiveling head for cutting control and convenience |cut circles and curves with the Genesis electric metal shear
- Variable speed (0-2500) SPM for versatility in cutting a variety of materials | cuts through sheet metal up to 14 gauge in thickness!
Malco TSHD Turboshear Heavy Duty Metal Cutting Attachment Shear
$94.49
$112.44
Amazon.com
Last update was on: November 25, 2024 4:50 pm
- Made in the USA
- Replaceable blades
- Turns your power drill into a heavy duty power shear
- Inserts into the chuck of a 14.4 volt or larger A/C or cordless drill
- Capacity to cut 18 gauge galvanized steel and 20-gauge spiral duct
- Navigates tight patterns and square cuts
Malco TSCM Corrugated Metal Turbo Shear
$104.99
$132.29
Amazon.com
Last update was on: November 25, 2024 4:50 pm
- Attaches to a drill or impact driver you already own
- Make fast cross-cuts, lengthwise trim cuts in large or small metal corrugated patterns
- 360 degree rotating head for optimum tool clearance and material flow
- Able to cut curves and straight lines
- Made in the USA
Malco TSF2 TurboShear Fiber Cement Backer Board Shear
$138.32
$203.33
Amazon.com
Last update was on: November 25, 2024 4:50 pm
- Attaches to a drill or impact driver you already own
- Easily cuts 1/2-inch backer board and 5/16-inch Fiber Cement Siding Plank with minimal dust
- 360 degree rotating head for optimum tool clearance and material flow
- Able to cut precise arcs, straight lines and fine trimming
- Made in the USA
PacTool SS204 Snapper Shear For Cutting Up To 5/16” Fiber Cement Siding, 4.8 Amp Motor
$162.98
$234.69
Amazon.com
Last update was on: November 25, 2024 4:50 pm
- CUTS FIBER CEMENT- Designed to cut fiber cement siding up to 5/16” thick
- LESS DUST, LESS MESS- Keep the job OSHA compliant, this unique shear design cuts fiber cement quickly while producing less dust making for easy clean-up
- SOLID STEEL BLADES- Reversible blades are machined from solid tool steel and are durable enough for 20, 000 feet of cutting
- 4.8-AMP MOTOR- 3/8” drive motor is ideal for smaller jobs or DIY projects
DEWALT DCS494B 20V MAX 14ga Swivel Head Double Cut Shears (Tool Only)
$251.64
$374.94
Amazon.com
Last update was on: November 25, 2024 4:50 pm
- 360 degree tool with a free swivel head which allows user to access tight quarters
- Cuts 7/32" strip which continuously curls out of the cutting area providing accurate cuts
- LED work light illuminates surface
- Cordless shears allows user to take the tool to the workplace
- Battery sold separately
- Battery & Charger Sold Separately
DEWALT DWASHRIR Impact Ready Shears Attachment
$48.17
$66.47
Amazon.com
Last update was on: November 25, 2024 4:50 pm
- Able to cut up to 18GA material
- 360 degree swivel head for maneuverability
- Connects via standard 1/4-inch hex shank
- Compatible with most 18V-20V impact driver and drills
- Able to cut up to 18GA material
- Connects via standard 1/4-inch hex shank
Dicfeos Double Head Metal Sheet Nibbler Cutter with Circle Cutting Accessories, Drill Attachment with Wrench & Parts, Maximum 14 Gauge Steel
$35.99
$51.11
Amazon.com
Last update was on: November 25, 2024 4:50 pm
- Fitting effortlessly into any standard drill. It can glide through material up to 2mm thick or 14 gauge and creates a precision, burr free edge
- Sheet metal, corrugated material, pipes, Complex profiles, powder coated material, stainless steel, copper, aluminum, Formica, plastic, fiberglass. It is so versatile and it can handle it all with ease
- Cut in any direction and follow the profile of the material. Gutters, roof sections, Complex shapes or stencils can be cut with precision as it can move anywhere within 360 degrees.
Double Head Sheet Metal Cutter, Versatile Nibbler Drill Attachment for Straight Curve and Circle Cutting, Maximum 14 Gauge Steel, Perfect for Home DIY and Car Repair
$32.99
$43.88
Amazon.com
Last update was on: November 25, 2024 4:50 pm
- ►Easy and fast to cut 14 gauge material and creates a precision, burr free edge
- ►360 degree double cutting head to cut straight line, curve line and circles
- ►HSS cutting blades to cut including but not limited to: Sheet metal, corrugated material, pipes, complex profiles, powder coated material, stainless steel, copper, aluminium, formica, plastic, fibreglass
- ►Fits any drill that works between 1500-3000 RPM, More easy and powerful than normal shears and snips
Double Headed Sheet Metal Nibbler, REXBETI Drill Attachment Metal Cutter with Extra Punch and Die, 1 Cutting Hole Accessory and 1 Step Drill Bit, Perfect for Straight Curve and Circle Cutting (gold)
$35.99
$52.19
Amazon.com
Last update was on: November 25, 2024 4:50 pm
- Easy and fast to cut 14 gauge material and creates a precision, burr free edge
- 360 degree double cutting head to cut straight line, curve line and circles
- HSS cutting blades to cut including but not limited to: Sheet metal, corrugated material, pipes, complex profiles, powder coated material, stainless steel, copper, aluminium, formica, plastic, fibreglass
- Fits any drill that works between 1500-3000 RPM, More easy and powerful than normal shears and snips
Lnchett Double Head Sheet Nibbler Metal Cutter, Quality Nibbler Drill Attachment for Straight Curve and Circle Cutting, Maximum 14 Gauge Steel
$45.99
$59.79
Amazon.com
Last update was on: November 25, 2024 4:50 pm
- ►Easy and fast to cut 14 gauge material and creates a precision, burr free edge
- ►360 degree double cutting head to cut straight line, curve line and circles
- ►HSS cutting blades to cut including but not limited to: Sheet metal, corrugated material, pipes, complex profiles, powder coated material, stainless steel, copper, aluminium, formica, plastic, fibreglass
- ►Fits any drill that works between 1500-3000 RPM, More easy and powerful than normal shears and snips
Neiko 00244A Impact Socket Adapter & Magnetic Bit Holder, 4Piece Set | 1/4" Hex Shank with 1/4, 3/8, 1/2" Drive | CR-V
$6.99
$8.95
Amazon.com
Last update was on: November 25, 2024 4:50 pm
- Drill to impact-ready socket adapters are compatible with respective-sized sockets, ratchet handles, extension bars, corded and cordless drivers for all your fastener needs
- One 1/4-inch hex shank magnetic bit holder is included for jobs requiring extensions into hard-to-reach spaces
- All chrome vanadium steel pieces are heat treated for superior strength, with black phosphate coating finish to protect against rust and corrosion
Double Headed Sheet Metal Nibbler Cutter, Lichamp Drill Attachment Nibbler Metal Cutting Double Head 360 Degree, 5 Pcs Tool Set with Iron Tool Box, for Workshop, Home DIY and Car Repair
$23.99
$32.15
Amazon.com
Last update was on: November 25, 2024 4:50 pm
- 1 ) PERFECT TOOL FOR ANY CUTTING TASK: This multi-purpose nibbler cutter is suitable for cutting of various materials such as sheet metal, corrugated material, pipes, complex profiles, powder coated material, stainless steel, copper, aluminum, formica, plastic, fiberglass etc. Suitable for car repairing and maintenance, metal sheet, gutters, roof sections, complex shapes or stencils.
- 2 ) EASY USE AND CONTROL: Easily fit into any standard drill that works between 1500-3000 RPM, More easy and powerful than normal shears and snips. Compact size, easy to operate and labor-saving. Easy and fast to cut 14 gauge material and creates a precision, burr free edge, 360 degree double cutting head to cut straight line, curve line, circles, or many other irregular lines and shapes.
MulWark 14-Gauge Double-Headed Sheet Metal Nibbler Cutter Tool Kit for Corrugated Metal Roof & Façade Construction| High Cutting Capacity 1500-3000 rpm Drill Attachment with Spare Replacement Parts
$33.99
$47.93
Amazon.com
Last update was on: November 25, 2024 4:50 pm
- HIGH CUTTING PERFORMANCE: Glide through materials up to 2mm/ 14gauge and create a precise, burr-free edge with excellent cutting performance
- Capable of cutting any thin metal and sheets: iron sheet, stainless steel sheet, aluminum, copper, brass, formica, plastic, fiberglass, complex profiles, pipes, powder coated materials, etc.
- PERFECT ALTERNATIVE: As an alternative of power/ air nibbler or metal shear, this extension set serves exactly the same purpose only with easier control, lower cost and higher compatibility. These work perfectly with any standard electric or pneumatic drill with speed of 1500rpm-3000rpm
