lifehackchallenge 
Best results for bench grinder and sander
Dayton Combination Belt and Bench Grinder, 120V – 49H006
BUCKTOOL 4 x 36-Inch Belt and 8-Inch Disc Sander with 3/4Hp Motor
Amazon.com
Last update was on: June 6, 2025 1:14 pm
- [Save 30% on belt and disc when you purchase this machine ! ]Sanding belt and disc were directly driven by motor shaft , maintenance free, you don't have to adjust the belt tension, change damage belt like before
- Motor direct drive design can increase 25% sanding efficiency than the traditional design. Max. developed 3/4 HP total enclosed induction motor supplies silent but powerful output
- Belt can work at 0 or 90 degrees depending on the needs of your project, the driven drum allows for sanding of curved work pieces. Quick sander belt replacement design & humanized track control
WEN 6515T 1 in. x 30 in. Belt Sander with 5 in. Sanding Disc
Amazon.com
Last update was on: June 6, 2025 1:14 pm
- Two-in-one sanding machine includes both a 1-by-30 inch belt and a 5-inch disc
- 2.3A motor provides up to 3160 FPM for the belt and 3450 RPM for the disc
- Sturdy heavy-duty base prevents walking and wobbling during operation
- Features two separate dust ports for maximum vacuuming efficiency
- Includes a miter gauge, an 80-grit sanding disc, a 100-grit sanding belt and a 2-year warranty
WEN 6502T 4.3-Amp 4 x 36 in. Belt and 6 in. Disc Sander with Cast Iron Base
Amazon.com
Last update was on: June 6, 2025 1:14 pm
- Two-in-one sanding machine includes both a 4-by-36 inch belt and a 6-by-6 inch disc
- Belt tilts anywhere from 0 to 90 degrees
- Sturdy cast iron base prevents any heavy vibrations
- 4.3 Amp motor provides up to 3600 RPM
- Tension release lever provides for simple changes between sandpaper grits
JET J-41002 2-Inch by 42-Inch 3/4-Horsepower Bench Belt and 8-Inch Disc Sander
Amazon.com
Last update was on: June 6, 2025 1:14 pm
- Deluxe miter gauge that turns and locks for common angles, 45 degrees both left and right
- Hinged idler wheel cover, tilting table
- Abrasive belt unit does the work of a jig saw, coping saw, or hand file while removing material and finishing
- Allows an operator to get into small openings, plus handle odd shapes and angles
- Grind, sand, or finish large work pieces on the disc unit fast and efficiently, table is slotted to accept miter gauge
Palmgren 2" x 42" Belt, 6" Disc bench finishing machine
RIKON Power Tools 50-151 Belt with 5" Disc Sander, 1" x 30", Blue
Grizzly H6070 Belt and 5-Inch Disc Sander, 1 x 30-Inch
WEN 4288 Cast Iron Bench Grinder Pedestal Stand with Water Pot
Amazon.com
Last update was on: June 6, 2025 1:14 pm
- Heavy-duty cast iron and steel construction prevents walking and wobbling during operation
- 9.9-inch by 12.4-inch steel mounting plate accommodates a variety of bolt orientations
- Measures in at 31.5 inch height with an onboard water pot to cool down projects
- Compatible with the entire line of WEN Bench Grinders
- Universal design fits the majority of bench grinders on the market
WEN 6307 Variable Speed Detailing File Sander with 1/2-by-18" Belt
Amazon.com
Last update was on: June 6, 2025 1:14 pm
- Variable speed dial powers the belt anywhere from 1080 to 1800 feet per minute
- Auto-tracking belt system requires no tensioning or adjustments
- Pivot the 1/2-by-18-inch belt up to 55 degrees to meet the needs of any project
- Tool-free belt installation makes for quick and easy belt changes during the job
- Includes three abrasive sanding belts, a dust port attachment and a two-year warranty
WEN 4276 2.1-Amp 6-Inch Bench Grinder with Flexible Work Light
Astro3037 1/2-Inch x 18-Inch Air Belt Sander with Belts
Amazon.com
Last update was on: June 6, 2025 1:14 pm
- Great for Spot Weld Removal
- Simple belt tension lever
- Variable speed control and increased pulley space for new thicker belts
- Industry leading 0.5HP
- Includes: 303740 -Sanding Belt 40 Grit - 1/2" x 18" 303760 - Sanding Belt 60 Grit - 1/2" x 18" 303780 - Sanding Belt 80 Grit - 1/2" x 18"
BUCKTOOL 4 x 36-Inch Belt and 6-Inch Disc Sander with Portable Al. Base
Amazon.com
Last update was on: June 6, 2025 1:14 pm
- [Save 30% on belt and disc when you purchase belt sander]Sanding belt and disc were directly driven by motor shaft , maintenance free, you don't have to adjust the belt tension, change damage belt like before
- Motor direct drive design can achieve 25% sanding efficiency. Max. developed 3/4HP total enclosed induction motor supplies silent but powerful performance. This Sander meets CSA standards. We give one year warranty. For motor defective, we will replace new machine, spare parts issue will send free parts for repair
TACKLIFE Classic Belt Sander 3 ×18-Inch with 13Pcs Sanding Belts, Bench Sander with Variable-speed Control, Fixed Screw Clamps, Dust Box, Vacuum Adapters, 10Feet(3M) Length Power Cord – PSFS1A
Amazon.com
Last update was on: June 6, 2025 1:14 pm
- Comes with 13pcs sanding belts, 7 x 80grits, 6 x 120 grits.
- ▲【2 In 1: Bench & Belt Sander】 Equipped with two metal screw clamps, Tacklife belt sander can be turned over and fixed to table, acting as a bench sander, lock-on button helps to free your hand, providing more convenience and flexibility.
- ▲【13Pcs Sanding Belts】 Come with 6pcs 120 grit and 7pcs 80 grit aluminum oxide sanding belts, saving your money, meeting the requirements for your different projects. Metal clamping lever for easy and quick sanding belt change.
MultiTool 36" x 2" Belt Grinding Attachment
Amazon.com
Last update was on: June 6, 2025 1:14 pm
- EFFICIENT: Superior performance and a user-friendly belt change of under 5 seconds produce better quality with less downtime.
- VERSATILITY: Grinding, sanding or polishing in 4 positions on rubber contact wheel, flat paten, disc or free-strapping. The unit can be swiveled vertically or any position in between.
- ACCURATE TRACKING: The running position of the belt is simple to adjust and it stays there, allowing for quality finishing.
Ikohe Belt Sander
Amazon.com
Last update was on: June 6, 2025 1:14 pm
-
This compact and convenient Belt Sander is ideal for sprue grinding, model making and bench work. - It is powered by a flex shaft that is easily attached with the quick change collar.
- Quick belt tensioning and changing is done with the turn of a knob.
- Clamps onto bench or counter, adjustable to infinite angles.
- Comes complete with Adjustable Clamp, vacuum connector and 5 assorted ruby belts– 80, 120, 180, 240 & 320 grit.
Bench Grinder Replacement Sharpening Tool Rest Jig for 6” and 8” Grinders and Sanders BG
Amazon.com
Last update was on: June 6, 2025 1:14 pm
- Will work with both 6” and 8” diameter grinders and belt sanders with 1” wide wheel or belt
- Mounts directly to bench and can be quickly removed to allow free hand grinding
- Tool rest comes with a grinding jig that will accept blades/chisels up to 2.5 inches wide
- Can easily move forward/back, up/down and rotate
- Constructed from anodized aluminum and will never rust.
