lifehackchallenge 
Best results for cnc drill press machine
HFS (R) 58pc 5/8" Slot 1/2"-13 Stud Hold Down Clamp Clamping Set Kit Bridgeport Mill
【The Best Deal】OriGlam Mist Coolant Lubrication Spray System for Metal Cutting Engraving Cooling Sprayer Machine for Air Pipe CNC Lathe Milling Drill
$18.95
$25.20
Amazon.com
Last update was on: November 25, 2024 2:13 am
- √ Great Value - Processing the coolant can save more than 80%, the cooling effect is no less than the conventional water-cooled.
- √ Working Safer - Gas processing chips are blown away, working safer
- A lot of water problem solving tools, easier to clean up.
- √ Save Time - Not only increases the machining cutting speed, save time and reduce processing costs and tool wear.
- √ Easy To Use - Air flow and spray mist volume adjustable design, easier to use.
ChgImposs Mist Coolant Lubrication Spray System With Check Valve and Stainless Steel Flexible Pipe for Metal Cutting Engraving Cooling Machine/Air Pipe CNC Lathe Milling Drill
$31.96
$38.67
Amazon.com
Last update was on: November 25, 2024 2:13 am
- Save 60-80% lubricants compared with the oldest lubrication tube. Flexible Pipe Length: 1.5m / 4.92ft
- Flexible Pipe Diameter: 4mm / 0.16in
- Stainless steel flexible pipe is more resistant to high temperatures.
- Air flow and spray mist volume adjustable design, easier to use.
- In the liquid without pressure output required to ensure that the air pressure in the range 5-7KGF / CM2 (atomization and gas, associated gas pressure)
JET JMD-18 350018 230-Volt 1 Phase Milling/Drilling Machine
WEN 33013 4.5A Variable Speed Single Phase Compact Benchtop Milling Machine with R8 Taper
$1,042.64
$1,532.68
Amazon.com
Last update was on: November 25, 2024 2:13 am
- Variable speed goes anywhere from 100 to 1,100 RPM on the low setting and 100 to 2,500 RPM on the high setting
- 18-1/8 x 4-3/4 inch table travels 11-13/16 inches along the X-axis and 5-1/8 inches along the Y-axis
- Bevel the head and column 45 degrees in either direction for angled cuts in metal, wood, plastic and more
- Compact cast iron design measures in at 23-1/4 by 22 by 29-1/2 inches in size with an 8-1/2 by 15 inch foot print
Irwin Tools Drill Press Vise, 4", 226340
Led Magnetic Machine Work Light IP65 Water Proof Flexible Gooseneck lamp 900 Lumens 120 Volt for Lathe Milling Drill Press Industrial Lighting
$69.80
$81.67
Amazon.com
Last update was on: November 25, 2024 2:13 am
- IP65 Water Proof: Led Work light is made of high-quality aluminum alloy light head, Added water proof rubber ring, It can protect against the water spray generated by the machine.
- Power and voltage: Input voltage range is 110 to 240V, of course, can input 120V
- three LEDs,9W luminous flux is 900 lumens, longer life than halogen lamps, more energy saving.
- Flexible Gooseneck: flexible metal hose + plastic tube, about 20 inches in length, can adjust the direction of illumination 360 degrees.
Happybuy 6 Inch ACCU Lock Down Vise Precision Milling Vice 6 Inch Jaw Width Drill Press Vise Milling Drilling Machine Bench Clamp Clamping Vice (6”)
(Imperial Units, not Metric)1/16” 1/8” 5/32” 3/16” 1/4” 5/16” 3/8” 1/2” HSS 4 Flute Straight Shank Square Nose End Mill Cutter (8 Pcs)
$19.99
$24.79
Amazon.com
Last update was on: November 25, 2024 2:13 am
- √ MATERIAL: HSS
- √ Cutting Diameter : 1/16" 1/8" 5/32'' 3/16" 1/4" 5/16" 3/8" 1/2"
- √ 4Flute,Full grinded, high abrasion resistance, obtain accuracy and fine finish
- √ Suitable for aluminium, cast iron, copper, magnesium alioy, plastics, wood etc
- √ Package: 8 Pcs
Qibaok 8PCS End Mill Bits, HSS CNC Cutter Drill Bits Straight 4 Flute Mill Bit Set + 6PCS Center Drill Bits, HSS Lathe Mill 60 Degrees Countersink Drill Bits for Wood, Aluminum, Steel, Titanium
$17.99
$19.97
Amazon.com
Last update was on: November 25, 2024 2:13 am
- ????【MATERIAL】High speed steel(HSS), high abrasion resistance, obtain accuracy, high-speed cutting for the high hardness
- ????【8PC END MILL BITS】End Mill Bits usually used to be assembled on milling machine and used for profiling, shoulder milling, finishing operations, general purpose machining of both ferrous and nonferrous materials
- ????【6PC CENTER DRILL BITS】Double ended, standard 60 degree included angle, used for centering work ends, where the work piece is to be revolved on machine centers
Metal Cutting Engraving Machine Mist Cool Coolant Lubrication Spray System for Air Pipe CNC Lathe Milling Drill for Cooling Sprayer Machine
$22.99
$32.19
Amazon.com
Last update was on: November 25, 2024 2:13 am
- 1. Processing the coolant can save more than 80%, the cooling effect is no less than the conventional water-cooled
- 2. Gas processing chips are blown away, working safer
- A lot of water problem solving tools, easier to clean up
- 3. The nebulizer gas and coolant is adjustable, easy to use on different processing conditions
- 4. Even the super-hard alloy precision machining the workpiece can achieve a smooth surface
POWERTEC 71168 T-Track Hold Down Clamps, 5-1/2” L x 1-1/8” Width – 2 Pack
$21.99
$27.49
Amazon.com
Last update was on: November 25, 2024 2:13 am
- INCLUDES: (2) Hold Down Clamps for T-Tracks/T-Slots
- FUNCTION: Provides exceptional clamping action for your universal t-track system configurations and assemblies
- FEATURES: Ergonomically designed 5 star knobs, non-marring clamping pads, and a high tension clamping capacity
- DESIGN: Made from premium grade anodized aluminum with a lever shaped profile ensuring optimal leverage in addition to work piece accessibility
