Best budd central vacuum replacement parts
Deal Score0
Deal Score0
Best results for budd central vacuum replacement parts
Cen-Tec Systems CT20DXQD Quiet Drive Vacuum Electric Brush
12in Deluxe Central Vacuum Accessory Floor Brush
$8.69
$12.86
Last update was on: November 25, 2024 12:30 pm
- Deluxe 12 Inch Wide Natural Bristle Deluxe Bare Floor Brush Fits Most Central Vacuum Systems
- Fits all Vacuums Which Use a 1.25" Diameter Hose or Wand
- Natural Horse Hair Bristle Brush Cleans Even the Most Delicate Smooth Floors Without Scratching Them
- 90 Degree Swivel Neck Allows Cleaning in Tight Areas, Under Furniture Simple
Cen-Tec Systems 37737 12" Combination Hard Floor and Carpet Vacuum Nozzle
$28.47
$42.14
Last update was on: November 25, 2024 12:30 pm
- The 12” 37737 is designed for silent movement on hard floor with a wrap around nylon brush and low noise wheel. The brush is retracted using and on the tool rocker switch and then is suitable for all carpeted surfaces. The 1 ¼” neck of the tool double pivots to follow you through the vacuuming motion keeping the face of the tool at the ideal angle to insure cleaning performance.
- The stainless base plate has deep channels to the tool edge to insure excellent edge cleaning and maximum air flow for capturing debris. Two lint strips in front of and behind an oversized channel capture lint and fibers from the carpets surface and help direct them into the air stream.
Cen-Tec Systems 93785 Premium Vacuum Attachment Kit with Telescoping Wand, Gray
$42.99
$58.47
Last update was on: November 25, 2024 12:30 pm
- Designed to work with both conventional and electric hoses that have a button lock stub tube to engage the chrome telescopic wand included in the set. The wand features Cen-Tec’s exclusive button down feature that makes it easier to disengage the hose from the wand for above the floor cleaning and storage
- Includes a 12” pivoting neck natural fill floor brush in pearl gray. The brush is designed for use on all hard floor surfaces including hardwood, laminate, tile, stone, concrete, vinyl, and linoleum
35′ "Comet" Central Vacuum Kit with Hose, Power Head & Tools – Works with All Brands of Central Vacuum Units
$269.95
$402.23
Last update was on: November 25, 2024 12:30 pm
- Light gray 35ft 1 3/8" inside diameter electric crushproof hose (27% more airflow than 1 1/4" inside diameter hose) with a 3-way switch and a soft grip ergonomic handle.
- Light gray colored "Comet" power head.
- Comes complete with a 4 piece tool kit (12" Floor brush, crevice tool, upholstery tool and duster), telescopic wand for use with floor brush, red dust mop, caddy bag, wand tool caddy attachment, hose hanger and wall holder
EFP Dusting Brush Vacuflo Central Vacuum Grey Attachment fits Beam Nutone Hayden
$5.95
$6.55
Last update was on: November 25, 2024 12:30 pm
- Fits vacuums using the standard 1 1/4" hose / wand assembly
- Fit most major brands of vacuums including: Eureka, Electrolux, Fantom, Hoover, Kenmore, Kirby, Panasonic, Royal, Shop-Vac, Sunbeam, Vacuflo, Nutone, Beam, MD and any 1-1/4" vacuum hose.
- Natural, horse hair fibers for added protection while dusting
Cen-Tec Systems 34905 Hard Floor Vacuum Brush with Natural Fill, 12-Inch, Black
$12.96
$18.27
Last update was on: November 25, 2024 12:30 pm
- Works with all standard upright and canister vacuums with a 1.25 inch connection
- American made part
- Compatible with major brands of central vac, including Beam, Nutone, Electrolux, Hayden, VacuMaid, Aggressor, Vacuflo, MD, Canavac, Cyclovac, Air Vac
- Full 12 inches of cleaning path
- Versatile hard floor cleaning attachment
Cen-Tec Systems 34498 Telescopic Wand Vacuum Wand, Nylon Ring Collar, Chromed Steel, No Button
$24.53
$28.70
Last update was on: November 25, 2024 12:30 pm
- Compatible with major brands of central vacuum, including Beam, Nutone, Electrolux, Hayden, VacuMaid, Aggressor, Vacuflo, MD, Canavac, Cyclovac, Air Vacuum
- Compatible with all standard backpack vacuums and dry canister vacuums
- The 34498 chrome telescopic wand works with almost any vacuum variety and it's versatile nature makes it a must have for any operator
- Telescopes from 23.5 Inches to 39 Inches, aiding operators to reach far beyond a standard vacuum wand
Cen-Tec Systems 92718 Attachment Kit
$120.81
$161.89
Last update was on: November 25, 2024 12:30 pm
- Compatible with all major brands of central vacuum systems equipped with industry standard pin jack inlet valves, including: Beam, Electrolux, Vacuflo, Vacumaid, Nutone, Hayden, MD, Canavac, Cyclovac, and Imperium
- The package comes with two floor nozzles. One is a multi-surface nozzle which works equally well on carpet and hard floor surfaces. Ideal for area rugs and areas of the home where transitions from carpet to hard floor are typical. The second nozzle is a premium 12” USA produced hard floor brush with natural horsehair fill ideal for delicate floor surfaces
Ultra Clean 30′ Hose Kit with Beam Central Vacuum Electric Powerhead Sweep N Groom Rugmaster
$245.47
$297.02
Last update was on: November 25, 2024 12:30 pm
- Central Vacuum Electric Carpet Powerhead Sweep n Groom: Pigtail style power cord, All steel chromed beater bar, On / Off foot pedal switch
- Ultra Clean 30 foot Deluxe 3-Way Switch Electric Hose, color of the hose may vary: silver or light grey according to availability and at Seller's discretion. "Pigtail" or "Direct Connect" configuration available.
- PLEASE SPECIFY HOSE CONFIGURATION UPON PURCHASE by sending a message to Seller. If no hose configuration is specified, "Pigtail" will be sent as this is the most common for the majority of the households
Cen-Tec Systems 38342 Vacuum Floor Brush, 12-Inch, Gray
Genuine MP Soft Touch Deluxe Vacuum Cleaner or Central Vac Hardwood and Bare Floor or Wall Brush. Natural Delicate Horse Hair Bristles for thorough Cleaning. (14 Inch with Wheels)
$14.99
$17.39
Last update was on: November 25, 2024 12:30 pm
- Genuine Soft Touch Deluxe Vacuum Cleaner Floor Brushes by Maresh Products. Industry standard size for Vacuum Cleaners and Central Vacuums 1 ¼ “ wands or vacuum hoses. The female opening is tapered from 1.26 to 1.19 inch (1 1/4'',32mm industry standard size) Available in 10”, 12” or 14” natural fill floor brush . The 180 degree swivel neck allows easy maneuvering around furniture, or underneath tables (clearance needed is 3 inches) and easily cleans narrow gaps
Cen-Tec Systems 91420 Seven Piece Deluxe Vacuum Accessory Kit with Metal Wands
$42.75
$63.70
Last update was on: November 25, 2024 12:30 pm
- Two 1.25” Italian made chrome steel wands feature a unique nylon collar system to keep them securely together while permitting easy separation with a simple twist when not in use. The wands are designed to be compatible with North American standard 1.25” canister, upright, home shop, and central vacuums
- The 12” natural fill floor brush has a pivoting neck permitting it to move easily in and around tight spaces. The brush tapers to the end so it will fit into tight spaces for better detailing while vacuuming. A window cut in the front of the tool permits larger debris to enter the vacuum stream and be carried away rather than pushing it in front of the tool like a broom
XT 12-inch Swivel 360 Floor Brush Replacement for Shark NV642 Lift-Away Vacuum
$22.31
$32.80
Last update was on: November 25, 2024 12:30 pm
- Replacement ONE SIZE FITS MOST Vacuum Cleaner Attachment for: SHARK* Swivel 12" (300mm) Vacuum Cleaner Floor Brush Tool *Does not fit every Shark Vacuum. Does NOT fit Shark Rocket Vacuum!
- for Shark NV642 Rotator Lift-Away & Hoover Windtunnel (Does NOT fit Shark NV682,Lift-Away Navigator Rocket. Measure hose before purchase) Brush features: Replace your lost brush attachment, or add one to your cleaning The inner diameter of the included adapter is 1.438" (36.5mm), allowing this attachment to be used with MOST Shark vacuum cleaners.