The Best Dewalt Angle Air Grinder

The DEWALT DWE4012 7 Amp 12,000 RPM Paddle Switch Small Angle Grinder features a 7.5 Amp AC/DC, 12,000 rpm motor designed for faster material removal and higher overload protection. The One-Touch Guard allows for a single action to adjust the guard; no buttons or levers, just turn the guard to position it. A hex wrench replaces spanner wrench, which makes it more user friendly as a hex wrench is found in most tool boxes if lost. Its low profile, jam-pot gear case increases durability and allows tool to fit into tight spaces, and the Quick-Change Wheel Release allows tool free wheel removal without need for a wrench. This grinder has a 2-position removable side handle provides increased comfort and control. It also offers a slim, ergonomic body design that provides increased comfort in extended use applications. The 5/8″-11 spindle thread accepts a wide range of 4-1/2″ accessories. Includes: 2-position side handle, Depressed center wheel, One-Touch Guard, Hex Wrench.

The DEWALT DWMT70784 Cut-Off Tool features a light weight aluminum body with an ergonomically designed cushion grip for user comfort and ease. This cut-off tool has a touch control trigger for easy user control. It has a 1/4″ air inlet, and a safety throttle lever for protection. The DWMT70784 cut-off tool offers rear air exhaust to direct away from the tool. It operates at a speed of up to 22,000 RPM. It is backed by Dewalt’s 3 year limited manufacturers warranty.

The DEWALT DWE43116 4-1/2″- 5″ high performance trigger switch Grinder shuts the Grinder off in less than a tenth of a second when a wheel pinch or wheel stall occurs, extending the life of the gears and motor. The dust Ejection system™ technology provides durability by ejecting damaging dust and debris that enter through the air intake vents for extra protection. This unit also comes with 3 different type 27 guards. Specs: 13 amp motor, 9,000 RPM rating, trigger switch, 1700 max watts out, 2.3 HP, tool-free flange system, overload protection, tool weight = 5.7 lbs. Backed by DEWALT’S 3 year limited warranty. Includes: 1) Grinder, 1) side handle, inner and outer flange, 1) 4.5″ type 27 guard, 1) 5″ type 27 guard, 1) 6″ type 27 guard.

The DEWALT DWE402W 4-1/2″ Small Angle Grinder with Wheel features an 11 Amp AC/DC 11,000 RPM motor which is designed for faster material removal and higher overload protection. The Dust Ejection System provides durability by ejecting damaging dust and debris particles that enter the tool through the air intake vents. It has a low profile gear case allows access into tight spaces, along with a Quick-Change wheel release that allows tool free wheel removal without the need for a wrench. A One-Touch Guard allows for 360 degree rotation of the guard with a single action, and a paddle switch with safety lock-off prevents accidental start up. The matching wheel flanges allow the use of common accessories. Includes: (1) Grinder, One-Touch Guard, 2-Position Side Handle, Wrench, 4-1/2″ Abrasive Wheel.

DEWALT DWE4597 7-inch 8,500 4.9 HP Angle Grinder: DEWALT’s Perform & Protect line of Power Tools is designed to provide a high level of one of more of the following: control, dust containment, or low vibration, without sacrificing performance. This unit has a high power 4.9 HP (maximum motor HP) 8,500 rpm motor provides overload protection giving higher operating speeds under load. It features a E-Clutch System shuts the tool off when a wheel pinch is detected, reducing kick-back, (a Perform & Protect Control Feature). The anti-vibration side handle reduces the users exposure to vibration, (a Perform & Protect Vibration Feature), and the Power-Loss Reset prevents accidental re-starts following a power disruption when the tool is left in the “on” position, (a Perform & Protect Control Feature). A Power-Off Advanced Electronic Overload Protection shuts the tool off before it reaches overload or burn-up. Also featuring a Dust Ejection System that increases brush life and protects the motor from damaging particles entering the air intake that would otherwise abrade the motor. A low profile gear case allows for work in tight areas, and the automatic turn-off brushes shut down the tool when brushes need to be changed to avoid tool damage. It has a 3-position side handle which provides improved ergonomics for specific applications. The 8,500 rpm provides optimal material removal with 7″ grinding wheels. There is also a brush door allows for quick brush replacement, and the light weight design (12.3 lbs) lessens user fatigue. The Quick Change Guard allows user to quickly adjust guard to redirect sparks. A soft grip trigger handle provides greater comfort and control, and an anti-vibe trigger handle reduces user fatigue caused by vibration. Includes a 7″ guard and a 3-position anti-vibe side handle.

DEWALT DWE4597N 7-inch 8,500 rpm 4.9 HP Angle Grinder, No-Lk: DEWALT’s Perform & Protect line of Power Tools is designed to provide a high level of one of more of the following: control, dust containment, or low vibration, without sacrificing performance. This unit has a high power 4.9 HP (maximum motor HP) 8,500 rpm motor provides overload protection giving higher operating speeds under load. It features a E-Clutch System shuts the tool off when a wheel pinch is detected, reducing kick-back, (a Perform & Protect Control Feature). The anti-vibration side handle reduces the users exposure to vibration, (a Perform & Protect Vibration Feature), and the Power-Loss Reset prevents accidental re-starts following a power disruption when the tool is left in the “on” position, (a Perform & Protect Control Feature). A Power-Off Advanced Electronic Overload Protection shuts the tool off before it reaches overload or burn-up. Also featuring a Dust Ejection System that increases brush life and protects the motor from damaging particles entering the air intake that would otherwise abrade the motor. A low profile gear case allows for work in tight areas, and the automatic turn-off brushes shut down the tool when brushes need to be changed to avoid tool damage. It has a 3-position side handle which provides improved ergonomics for specific applications. The 8,500 rpm provides optimal material removal with 7″ grinding wheels. There is also a brush door allows for quick brush replacement, and the light weight design (12.3 lbs) lessens user fatigue. The Quick Change Guard allows user to quickly adjust guard to redirect sparks. A soft grip trigger handle provides greater comfort and control, and an anti-vibe trigger handle reduces user fatigue caused by vibration. Includes a 7″ guard and a 3-position anti-vibe side handle.

DEWALT DWE4557 7-inch 8,500 rpm 4.7 HP Angle Grinder has a High power 4.7 HP (maximum motor HP) 8,500 rpm motor that provides overload protection and higher operating speeds under load. The Dust Ejection System protects the motor from damaging particles entering air intake that would otherwise abrade the motor and increases brush life. An anti-vibe trigger handle reduces user fatigue caused by vibration, and the light weight design (11.6 lbs) lessens user fatigue. It features automatic turn-off brushes that shut down the tool when brushes need to be changed to avoid tool damage. The low profile gear case allows for work in tight areas, and 8,500 rpm provides optimal material removal with 7″ grinding wheels. It has a brush door that allows for quick brush replacement, and a Quick Change Guard that allows user to quickly adjust guard to redirect sparks. The soft grip trigger handle provides greater comfort and control, and a thick, “S” style cord which takes the abuse of the jobsite and shop environments providing durability and long life for the cord set. This grinder features a 3 position side handle to provide improved ergonomics for specific applications. Includes a 7″ guard and a 3-position side handle.

The DEWALT DWE4559N 9-inch 6,500 rpm 4.7 HP Angle Grinder No-Lk has a high power 4.7 HP (maximum motor HP) 6,500 rpm motor which provides overload protection and provides higher operating speeds under load. It features a Dust Ejection System which increases brush life and protects the motor from damaging particles entering the air intake that would otherwise abrade the motor. An anti vibe trigger handle reduces user fatigue caused by vibration. A light weight design (12.1 lbs) lessens user fatigue, and the automatic turn-off brushes shut down the tool when brushes need to be changed to avoid tool damage. A low profile gear case allows for work in tight areas, and 6,500 rpm provides optimal material removal with 9″ grinding wheels. It also has a brush window allows for quick brush replacement. The Quick Change Guard allows user to quickly adjust guard to redirect sparks, and a soft grip trigger handle provides greater comfort and control. A thick, “S” style cord takes the abuse of the jobsite and shop environments, providing durability and long life for the cord, and the 3-position side handle provides improved ergonomics for specific applications. Includes a 9″ guard and a rubber gear case cover.

The DWE43116N 4-1/2 in. – 6 in. High performance Grinder w/ trigger grip is powered by a 13 amp motor and equipped with the dust Ejection system™ technology Designed to protect the tool from damaging dust and debris that enters through air intake vents.

The DEWALT DWE4559CN 9-inch 6,500 rpm 4.7 HP Grinder, No-Lk, Cover has a high power 4.7 HP (maximum motor HP) 6,500 rpm motor which provides overload protection and provides higher operating speeds under load. The Gear Case Grip for Pipeliners allows gear case to be gripped as a handle. It features a Dust Ejection System which increases brush life and protects the motor from damaging particles entering the air intake that would otherwise abrade the motor. An anti vibe trigger handle reduces user fatigue caused by vibration. A light weight design (12.4 lbs) lessens user fatigue, and the automatic turn-off brushes shut down the tool when brushes need to be changed to avoid tool damage. A low profile gear case allows for work in tight areas, and 6,500 rpm provides optimal material removal with 9″ grinding wheels. It also has a brush window allows for quick brush replacement. The Quick Change Guard allows user to quickly adjust guard to redirect sparks, and a soft grip trigger handle provides greater comfort and control. A thick, “S” style cord takes the abuse of the jobsite and shop environments, providing durability and long life for the cord, and the 3 position side handle provides improved ergonomics for specific applications. Includes a 9″ guard and a rubber gear case cover.

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy Dewalt Angle Air Grinder, eg:

• What are Top 10 Dewalt Angle Air Grinder for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 Dewalt Angle Air Grinder to buy?
• What are Top Rated Dewalt Angle Air Grinder to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Dewalt Angle Air Grinder?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Dewalt Angle Air Grinder.
• Before deciding to buy any Dewalt Angle Air Grinder, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose Dewalt Angle Air Grinder and What you should consider when buying the Dewalt Angle Air Grinder and Where to Buy or Purchase the Dewalt Angle Air Grinder. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 Dewalt Angle Air Grinder of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Dewalt Angle Air Grinder.