Best drill bit for acrylic sheets
Deal Score0
Deal Score0
Best results for drill bit for acrylic sheets
Drill Bits for Plastic (acrylic, plexiglass, ABS, lexan, polycarbonate, pvc) Norseman 7pc Acrylic Point Drill Set in Vinyl Pouch. Includes 1/8", 5/32", 3/16", 7/32" 1/4", 5/16", and 3/8" Part BG4650A
Drill Bits for Plastic (acrylic, plexiglass, ABS, lexan, polycarbonate, pvc) Norseman 7pc Acrylic Point Drill Set in Vinyl Pouch. Includes 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", and 1/2" Part BG4600A
Titanium Step Drill Bit Set Unibit Reamer Reaming Bits Sheet Metal Plastic PVC Pipe Conduit Hole Cutter Universal Cone Saw 3 HSS Steel 1/4" Hex Shank
$12.89
$15.73
Last update was on: December 11, 2024 3:04 am
- 3 Piece Titanium Step Drill Bit Set 28 Different SAE Sizes Multi Hole Cutter With Fabric Carry Case
- Drills And Cuts Holes Through Thin Metal, Sheet Metal, Plastic, Conduit, PVC Pipe, Fiberglass, Wood
- Quick Connect / Quick Release 1/4" Hex Shank
- Compatible With All Drills And Impact Drivers
- Self Centering Split Point Tip Prevents Walking
- Double Flute Design Drills Holes FAST And CLEAN
Bosch TI2137 5/32 In. x 3-1/8 In. Titanium-Coated Drill Bit
$3.18
$3.53
Last update was on: December 11, 2024 3:04 am
- Super-hard titanium coating lasts up to six times longer than high-speed steel
- Self-starting point starts on contact
- Balanced double flute eliminates chatter and vibration
- Titanium reduces heat for longer life
- Drills clean, accurate holes in these thin materials (up to 1/8 In.): sheet metal, ducts, steel, copper, brass, aluminum, plastic, Plexiglass, wood, veneers, vinyl siding, plasterboard, PVC, stainless steel and cast iron
CO-Z Cobalt Added M35 Step Drill Bit, Spiral Step Drill Bit, Unibit Drill Bit for Cutting Drilling Holes On Stainelss Steel, Steel, Metal Sheet, Multiple Hole Stepped Up Bit for Professionals
$28.00
$38.64
Last update was on: December 11, 2024 3:04 am
- DURABLE & STURDY W/COBALT ADDED, solid M35 molybdenum high speed construction with cobalt added for extra durability, close to impossible to snap compared conventional drill bits, the unique 3-sided shank prevents slip in drill chuck and reduces shocks
- oiling the bits recommended before every use to maximize the service life.
- JAM-FREE PERFORMANCE, dual-flute design and three-sided shank design is optimized for cordless drills in high speed provides greater speed and control while minimizing steel scurf flying around, to lengthen service life, please do not set drilling speed at its maximum to avoid damage to the cutting edge.
CO-Z Large HSS Spiral Groove Step Drill Bit, 10 Sizes Titanium High Speed Steel 1/4" to 2-3/8" Drill Bit for Sheet Aluminium Metal Wood Hole Drilling, Big Multiple Hole Stepped Up Bit for DIY Lovers
$32.99
$48.83
Last update was on: December 11, 2024 3:04 am
- The step drill bit is made from upgraded high speed steel characterized by well-balanced toughness, wear resistance and red hardness properties for better and faster hole -drilling performance. The titanium coating makes the drill bit more durable so that it can last for years with uncompromised quality.
- The dual-flute design prevents metal fillings from flying around and clears chips faster thus it can drill more smoothly without heating up.
Segomo Tools 5 Piece SAE Multiple Hole 50 Sizes HSS Cobalt Step Drill Bit Set with Aluminum Case
$20.99
$29.39
Last update was on: December 11, 2024 3:04 am
- 5 piece step drill bit set (50 sizes in total) with non-walking drill tips
- Made from cobalt high speed steel with titanium coating for long life and easy cutting/drilling through steel sheets, aluminum sheets, wood board, plastic board etc.
- Different sized shanks ensure full compatibility with 1/4, 3/8 and 1/2 inch chuck sizes
- Set includes: Drill Bit 1: (3/8". 10 Steps): 1/4, 3/8, 1/2, 5/8, 3/4, 7/8, 1, 1-1/8, 1-1/4, 1-3/8. Drill Bit 2: (3/8". 12 Steps): 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8. Drill Bit 3: (3/8". 9 Steps): 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4. Drill Bit 4: (1/4". 13 Steps): 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2. Drill Bit 5: (1/4". 6 Steps): 3/16, 1/4, 5/16, 3/8, 7/16, 1/2
10pcs 1/8" Double Cut Tungsten Carbide Rotary Files Diamond Burrs Set Fits Dremel Rotary Tool for Grinder Drill, DIY Wood-working Carving, Metal Polishing, Engraving, Drilling
$12.23
$14.55
Last update was on: December 11, 2024 3:04 am
- LONG WORKING LIFE: Lasts long working life, packed with nice plastic case for safety storage and protection. High efficiency, high-quality finish, long service life, good economic returns.
- CARBIDE DIE GRINDER BITS Material: Tungsten Carbide Use: Rotary Burr. Total length 45-50mm, cutting diameter 1/4 Inch(6mm), shank length 35mm, shank diameter 1/8 inch(3mm).
- HIGH PRODUCTIVITY: Processing efficiency than the manual file to improve of times, than with a small handle wheel to improve nearly ten times.
HolePro T-200 1-5/8" to 8" TWIN BLADE Adjustable Hole Saw Cutter for Recessed Lights Speakers. HSS Blades use ¼ Drill Power of a Hole Saw to Cut Sheetrock Plastic Soft-woods NO PLYWOOD/PLASTER
$49.95
$65.43
Last update was on: December 11, 2024 3:04 am
- Replaceable HSS Blades SKU HP1183 ASIN B07GY3Z25P
- Twin blades for perfect balance – no bars to change or threads to break off
- Ball bearing mounted strong ABS shield with soft silicon gasket dust seal
- 11" OD Shield - Cuts perfect holes from 1-5/8" to 8" - replacing hole saw kits with multiple saws
- Max cut depth: 1": cuts sheetrock, wood (NO PLYWOOD or PLASTER), melamine, acrylic sheet, soft acoustic tile, plastics
MIFFLIN Cast Plexiglass Sheet (Opaque Black, 1 Piece, 24"x24", 0.118" (1/8 in) Thick), Acrylic Sheet, Plexi Glass, Plastic Sheet, Clear Plastic Sheet, Cast Acrylic Plexiglass, Square Plexiglass
Last update was on: December 11, 2024 3:04 am
- SUPERIOR TO GLASS - Half the weight and much stronger than glass. Offers better weather and UV resistance
- CELL CAST BENEFITS vs. extruded: More resistant to scratching and solvents, better optical properties; Outstanding resistance to long-term exposure to sunlight and weathering
- INCLUDES: 1 piece of Nominal 24 by 24 inch (23 7-8 x 23 7-8") acrylic sheet, 1/8" (0.118"). Double-sided safety craft paper to assure scratch free surface on arrival
Eliseo 4-1/2 Inch Hole Saw with Heavy Duty Arbor,HSS Bi-Metal Holesaw Drill Bits Cut Smooth and Fast in Wood,Plastic, Drywall, Thin Metal(Black)
$19.99
$27.39
Last update was on: December 11, 2024 3:04 am
- HIGH PERFORMANCE METIERAL: The Eliseo hole saw made of M42 High Speed Steel and BI-Metal, with higher hardness(≥64HRC), higher toughness and stronger wear resistance.
- EFFICIENT SMOOTH CUTTING---High-quality bi-metal band and the best cutting performance of HSS teeth combines with Non-binding clean edge design ensure Eliseo hole saw blade cuts smooth,clean and fast.
- WIDE APPLICATION---The Hole saw cuts 4.5 inch diameter holes through wood,plywood, plastic, drywall, soft plaster,acrylic-board and thin metal.The ELiseo Hole Saw comes in handy for your DIY projects when working on taillights, cooling fans, radiator ,stereo equipment and more.