Top 7 Leecraft Dw Zeroclearance Insert For Dewalt 10 In Miter Saws

This Leecraft Zero-Clearance Insert for DeWalt Miter Saw provides coated surface for friction free operation. The Insert fits DeWalt 10” and 12” miter saws. The Insert will work for Models: DW703, DW704, DW705, DW705S, DW706, DW713, DW715, DW716. Dimensions are 10” x 2-5/8” x 1/4″.

Replace your factory table saw insert with a phenolic zero clearance insert. Zero Clearance inserts help prevent kickback and tear-out on your stock pieces when feeding through a table saw blade. By raising your blade up through the insert, you eliminate gaps between the side of the insert and the blade. This provides with much better stock support than with most factory inserts that come with the saw. This also prevents smaller stock pieces from falling into the opening that exists with factory inserts. Zero clearance inserts can be used with any type of standard carbide tipped saw blade (standard or thin kerf blades) and can also be used with dado blades. It is recommended that if you need an insert to accommodate both a standard saw blade and a dado blade, that you purchase two separate zero clearance inserts. Use one for your normal cuts and one for dado cuts. Actual Color May Vary.

Product description

LEECRAFT Phenolic Inserts and Sheet Stock reduce splintering and chip-out on the bottom side of regular or dado table saw cuts. Simply raise your saw blade through the insert to create a “kerf” which precisely matches the blade on your saw. This 1/2″ thick insert is precision machined from a nearly frictionless melamine faced, high density phenolic laminate. It offers durability and flatness unobtainable from cheaper plastic inserts. Features like top mounted set screws for precise leveling, front/side adjustment screws for perfect side to side and front to rear fit, and a rear safety pin that keeps the rear of the insert in place, make this the best insert we have ever seen. Sheet stock material (1/2″ x 11″ x 15″) is perfect for creating your own custom jigs and fixtures. Craftsman insert measures 14″ x 3-3/4″ and fits most new, 10″ belt drive models. (Check the opening of your Sears saw before ordering). Complete with instructions. Insert surface colors may vary.

From the Manufacturer

The “zero clearance” concept is simple: The blade cuts its own perfectly sized slot by being raised through a machinable “blank” insert. Leecraft inserts are 1/2-inch-thick, high-density phenolic laminate, with bonded-melamine surface. They offer superior rigidity, flatness, durability, and low friction. User-friendly features include top-accessible leveling screws, lateral adjustment screws for a vibration-free fit, rear anti-lift pin (except JT-1), and a precut-blade bottom pocket that provides clearance for fully retracted blades and bevel cuts. Instructions included. Use carbide-tipped blades only. Fits Craftsman (Sears). Size: 14 by 3-3/4 inches.

Replace your factory table saw insert with a phenolic zero clearance insert. Zero Clearance inserts help prevent kickback and tear-out on your stock pieces when feeding through a table saw blade. By raising your blade up through the insert, you eliminate gaps between the side of the insert and the blade. This provides with much better stock support than with most factory inserts that come with the saw. This also prevents smaller stock pieces from falling into the opening that exists with factory inserts. Zero clearance inserts can be used with any type of standard carbide tipped saw blade (standard or thin kerf blades) and can also be used with dado blades. It is recommended that if you need an insert to accommodate both a standard saw blade and a dado blade, that you purchase two separate zero clearance inserts. Use one for your normal cuts and one for dado cuts.

Includes (2) A24507 Push Sticks. New, Bulk Packed. Genuine OEM replacement part. Consult owners manual for proper part number identification and proper installation. Compatible with: DeWALT: DW744XRS Type 5 10″ Table Saw, DW744XRS Type 6 10″ Table Saw, DW744X Type 5 10″ Table Saw, DW744X Type 6 10″ Table Saw

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy Leecraft Dw Zeroclearance Insert For Dewalt 10 In Miter Saws, eg:

• What are Top 10 Leecraft Dw Zeroclearance Insert For Dewalt 10 In Miter Saws for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 Leecraft Dw Zeroclearance Insert For Dewalt 10 In Miter Saws to buy?
• What are Top Rated Leecraft Dw Zeroclearance Insert For Dewalt 10 In Miter Saws to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Leecraft Dw Zeroclearance Insert For Dewalt 10 In Miter Saws?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Leecraft Dw Zeroclearance Insert For Dewalt 10 In Miter Saws.
• Before deciding to buy any Leecraft Dw Zeroclearance Insert For Dewalt 10 In Miter Saws, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose Leecraft Dw Zeroclearance Insert For Dewalt 10 In Miter Saws and What you should consider when buying the Leecraft Dw Zeroclearance Insert For Dewalt 10 In Miter Saws and Where to Buy or Purchase the Leecraft Dw Zeroclearance Insert For Dewalt 10 In Miter Saws. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 Leecraft Dw Zeroclearance Insert For Dewalt 10 In Miter Saws of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Leecraft Dw Zeroclearance Insert For Dewalt 10 In Miter Saws.